1482 CHAPTER 93: IPV6 PIM CONFIGURATION COMMANDS
View IPv6 PIM view
Parameter interval: Assert timeout time in seconds, with an effective range of 7 to
2,147,483,647.
Description Use the
holdtime assert command to configure the global value of the assert
timeout time.
Use the
undo holdtime assert command to restore the default setting.
By default, the assert timeout time is 180 seconds.
Related command: holdtime join-prune (IPv6 PIM view), pim ipv6 holdtime join-prune and pim
ipv6 holdtime assert.
Example # Set the global value of the assert timeout time to 100 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] holdtime assert 100
holdtime join-prune (IPv6 PIM view)
Syntax holdtime join-prune interval
undo holdtime join-prune
View IPv6 PIM view
Parameter interval: Join/prune timeout time in seconds, with an effective range of 1 to
65,535.
Description Use the
holdtime join-prune command to configure the global value of the
join/prune timeout time.
Use the
undo holdtime join-prune command to restore the default setting.
By default, the join/prune timeout time is 210 seconds.
Related command: holdtime assert (IPv6 PIM view), pim ipv6 holdtime assert and pim ipv6
holdtime join-prune.
Example # Set the global value of the join/prune timeout time to 280 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] holdtime join-prune 280
