A SERVICE OF

logo

Open as PDF
next previous
19
AT M C ONFIGURATION COMMANDS
atm class
Syntax atm class atm-class-name
undo atm class atm-class-name
View System view
Parameter atm-class-name: Name of ATM class, a string of 1 to 16 characters.
Description Use the
atm class command to create an ATM class and enter the ATM class
view.
Use the
undo atm class command to delete the specified ATM class.
An ATM class is a group of predefined parameters that can be used for ATM
interface or PVC.
Related command: atm-class.
Example # Create an ATM class named “main” and enter ATM class view.
<Sysname> system-view
[Sysname] atm class main
[Sysname-atm-class-main]
atm-class
Syntax atm-class atm-class-name
undo atm-class
View ATM interface view/PVC view
Parameter atm-class-name: Name of ATM class, a string of 1 to 16 characters.
Description Use the
atm-class command to apply an ATM class to an ATM interface or a PVC.
Use the
undo atm-class command to remove the ATM class applied to a ATM
interface or a PVC.