1123
display ospf nexthop
Syntax display ospf [ process-id ] nexthop
View Any view
Parameters process-id: OSPF process ID, in the range 1 to 65535.
Description Use the
display ospf nexthop command to display OSPF next hop information.
If no OSPF process is specified, next hop information of all OSPF processes is
displayed.
Examples # Display OSPF next hop information.
<Sysname> display ospf nexthop
OSPF Process 1 with Router ID 192.168.0.1
Routing Nexthop Information
Next Hops:
Address Refcount IntfAddr Intf Name
----------------------------------------------------------------
192.168.0.1 1 192.168.0.1 Ethernet1/0
192.168.0.2 1 192.168.0.1 Ethernet1/0
192.168.1.1 1 192.168.1.1 Ethernet1/1
Table 269 Description on the fields of the display ospf 1 lsdb network command
Field Description
Type LSA type
LS ID DR IP address
Adv Rtr Router that advertised the LSA
LS Age LSA age time
Len LSA length
Options LSA options
Seq# LSA sequence number
Chksum LSA checksum
Net Mask Network mask
Attached Router ID of the router that established adjacency with the DR, and ID of
the DR itself
Table 270 Description on the fields of the display ospf nexthop command
Field Description
Next hops Information about Next hops
Address Next hop address
Refcount Reference count, indicating the number of routes using the nexthop
IntfAddr Outbound interface address
Intf Name Outbound interface name
