2498 CHAPTER 166: POE CONFIGURATION COMMANDS
# Enable PoE through a PoE configuration file on a PoE interface.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe enable
[Sysname-poe-profile-abc-1] quit
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1]apply poe-profile name abc
poe enable pse
Syntax poe enable pse pse-id
undo poe enable pse pse-id
View System view
Parameter pse-id: PSE ID. pse-id indicates number of the slot where a PoE interface locates.
Description Use the
poe enable pse command to enable PoE for the PSE.
Use the
undo poe enable pse command to disable PoE for the PSE.
By default, PoE is disabled for the PSE.
n
The support for this command varies with devices.
Example # Enable PoE for PSE 2.
<Sysname> system-view
[Sysname] poe enable pse 2
poe legacy enable
Syntax poe legacy enable [ pse pse-id ]
undo poe legacy enable [ pse pse-id ]
View System view
Parameter pse pse-id: Specifies a PSE ID. The support for the argument varies with devices.
pse-id indicates number of the slot where a PoE interface locates.
Description Use the
poe legacy enable command to enable the PSE to detect nonstandard
PDs.
Use the
undo poe legacy enable command to disable the PSE from detecting
nonstandard PDs.
