3
ATM E3/T3 INTERFACE
CONFIGURATION COMMANDS
cable
Syntax cable { long | short }
undo cable
View ATM T3 interface view
Parameter long: Long haul mode, with a cable length in the range 151 to 500 m (495 to
1640 ft.).
short: Short haul mode, with a cable length in the range 0 to 150 m (0 to 495 ft.).
Description Use the
cable command to configure the cable length of the ATM T3 interface.
Use the
undo cable command to restore the default.
By default, short haul mode applies.
Example # Set the cable length of ATM T3 interface 5/0 to long haul.
<Sysname> system-view
[Sysname] interface atm 5/0
[Sysname-Atm5/0] cable long
clock
Syntax clock { master | slave }
undo clock
View ATM E3/T3 interface view.
Parameter master: Sets the clock mode as master.
slave: Sets the clock mode as slave.
Description Use the
clock command to set the clock mode of the ATM E3/T3 interface.
