2040 CHAPTER 133: NAT CONFIGURATION COMMANDS
<Sysname> reset nat session
reset userlog export
Syntax reset userlog export
View Use view
Parameter None
Description Use the
reset userlog export command to clear the NAT log statistics.
Once the NAT log function is enabled, the system will make statistics for NAT logs
periodically.
Related command: display userlog export
Example # Clear the NAT log statistics.
<Sysname> reset userlog export
reset userlog nat logbuffer
Syntax reset userlog nat logbuffer
View User view
Parameter None
Description Use the
reset userlog nat logbuffer command to clear the NAT log buffer.
c
CAUTION: Clearing the NAT log buffer will remove all NAT logs in the buffer. You
are not recommended to use this command in normal situations.
Example # Clear the NAT logs in the buffer.
<Sysname> reset userlog nat logbuffer
userlog nat export host
Syntax userlog nat export host ip-address udp-port
undo userlog nat export host
View System view
