1853
122
WRED TABLE CONFIGURATION
COMMANDS
display qos wred table
Syntax display qos wred table [ table-name ]
View Any view
Parameters table-name: Name of the WRED table to be displayed.
Description Use the
display qos wred table command to display the configuration
information of WRED table.
If no table name is specified, the configuration information of all WRED tables will
be displayed.
Examples # Display configuration information of WRED table1, which is the list for
configured WRED parameters.
<Sysname> display qos wred table 1
Table Name: 1
Table Type: EXP based WRED
Exponent: 6
Precedence LowLimit HighLimit DiscardProbability
--------------------------------------------------------------------
00010
10010
20010
30010
40010
50010
60010
7 0 0 10
Table 492 Description on the fields of the display qos wred table command
Field Description
Table name WRED table name
Table type WRED table type
Exponent Exponent for calculating average queue length
Precedence Packet precedence level
Low limit Lower limit of the queue
High limit Higher limit of the queue
