1604 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS
Description Use the enable traffic-adjustment advertise command to enable forwarding
adjacency.
Use the
undo enable traffic-adjustment advertise command to disable
forwarding adjacency.
By default, forwarding adjacency is disabled.
Forwarding adjacency allows OSPF to include static LSP tunnels in SPF calculation
but not advertise them to OSPF neighbors.
Example # Enable forwarding adjacency when the IGP protocol is OSPF.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] enable traffic-adjustment advertise
# Enable forwarding adjacency when the IGP protocol is IS-IS.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] enable traffic-adjustment advertise
explicit-path
Syntax explicit-path pathname [ disable | enable ]
undo explicit-path pathname
View System view
Parameter pathname: Name of an explicit path for a tunnel, a string of 1 to 31 characters.
disable: Disables explicit routing.
enable: Enables explicit routing.
Description Use the
explicit-path command to create an explicit path and enter its view.
Use the
undo explicit-path command to remove an explicit path.
Example # Create an explicit path named path1 and enter its view.
<Sysname> system-view
[Sysname] explicit-path path1
[Sysname-explicit-path-path1]
list hop
Syntax list hop [ ip-address ]
