2258 CHAPTER 148: DEVICE MANAGEMENT COMMANDS
<Sysname> display power
Power 1 State: Absent
Power 2 State: Normal
Power 3 State: Absent
The above information indicates that power supply 2 works normally, and power
supply 1 and power supply 3 are absent.
display reboot-type
Syntax display reboot-type [ slot slot-number ]
View Any view
Parameter slot slot-number: Displays reboot type of the specified card, where slot-number
represents the slot number of a card. The value range varies with devices.
Description Use the
display reboot-type command to display the reboot type of a device.
Example # Display the reboot type of the card in slot 2 of the device.
<Sysname> display reboot-type slot 2
The rebooting type this time is: Cold
The above information indicates that the last reboot type of the device is Cold
boot. (If it is displayed as Warm, it indicates the reboot type is ware boot).
display schedule reboot
Syntax display schedule reboot
View Any view
Parameter None
Description Use the
display schedule reboot command to display the device reboot time
set by the user.
Related command: schedule reboot at and schedule reboot delay.
Example # Display the reboot time of a device.
<Sysname> display schedule reboot
System will reboot at 16:00:00 2006/03/10 (in 2 hours and 5 minutes).
The above information indicates the system will reboot at 16:00:00 on March 10,
2006 (in two hours and five minutes).
