82
IPV6 BGP CONFIGURATION
COMMANDS
balance (IPv6 address family view)
Syntax balance number
undo balance
View IPv6 address family view
Parameters number: Number of BGP routes participating in load balancing, in the range 1 to
8. When it is set to 1, no load balancing is available.
Description Use the
balance command to configure the number of routes participating in
IPv6 BGP load balancing.
Use the
undo balance command to restore the default.
The feature is not available by default.
Unlike IGP, BGP has no explicit metric for making load balancing decision. Instead,
it implements load balancing by defining its routing rule.
Related commands: display ipv6 routing-table on page 942.
Examples # Set the number of routes participating in IPv6 BGP load balancing to 2.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] balance 2
bestroute as-path-neglect (IPv6 address family view)
Syntax bestroute as-path-neglect
undo bestroute as-path-neglect
View IPv6 address family view
Parameters None
