88
IGMP CONFIGURATION COMMANDS
display igmp group
Syntax display igmp [ vpn-instance vpn-instance-name | all-instance ] group
[ group-address | interface interface-type interface-number ] [ static | verbose ]
View Any view
Parameter vpn-instance-name: VPN instance name, a case sensitive string of up to 31
characters.
all-instance: Specifies all VPN instances.
group-address: Multicast group address, in the range of 224.0.1.0 to
239.255.255.255.
interface interface-type interface-number: Displays the IGMP multicast group
information about a particular interface.
static: Displays the information of statically joined IGMP multicast groups.
verbose: Displays the detailed information of IGMP multicast groups.
Description Use the
display igmp group command to view IGMP multicast group
information.
Note that:
■ If you do not specify group-address, this command will display the IGMP
information of all the multicast groups.
■ If you do not specify interface-type interface-number, this command will
display the IGMP multicast group information on all the interfaces.
■ If you do not specify the static keyword, this command will display the detailed
information about the dynamically joined IGMP multicast groups.
Example # Display the information about dynamically joined IGMP multicast groups on all
interfaces in the public instance.
<Sysname> display igmp group
Total 3 IGMP Group(s).
Interface group report information of VPN-Instance: public net
Ethernet1/0(20.20.20.20):
Total 3 IGMP Groups reported
