1173
Parameters route-policy-name: Routing policy name with 1 to 19 characters.
value: Priority for RIP route, in the range of 1 to 255. The smaller the value, the
higher the priority.
Description Use the preference command to specify the RIP route priority.
Use the undo preference route-policy command to restore the default.
By default, the priority of RIP route is 100.
You can specify a routing policy using keyword route-policy to set the specified
priority to routes matching the routing policy.
■ If a priority is set for matched routes in the routing policy, the priority applies to
these routes. The priority of other routes is the one set by the preference
command.
■ If no priority is set for matched routes in the routing policy, the priority of all
routes is the one set by the preference command.
Examples # Set the RIP route priority to 120.
<Sysname> system-view
[Sysname] rip 1
[Sysname-rip-1] preference 120
reset rip statistics
Syntax reset rip process-id statistics
View User view
Parameters process-id: RIP process number, in the range of 1 to 65535.
Description Use the
reset rip statistics command to clear the statistics of the specified RIP
process.
Examples # Clear statistics in RIP process 100.
<Sysname> reset rip 100 statistics
rip
Syntax rip [ process-id ] [ vpn-instance vpn-instance-name ]
undo rip [ process-id ] [ vpn-instance vpn-instance-name ]
View System view
