2404 CHAPTER 161: SYSTEM DEBUGGING COMMANDS
terminal. For the detailed description on the terminal debugging and
terminal monitor commands, refer to “terminal debugging” on page 2445
and “terminal monitor” on page 2447.
Related command: display debugging.
Example # Enable IP packet debugging.
<Sysname> debugging ip packet
display debugging
Syntax display debugging [ interface interface-type interface-number ] [ module-name ]
View Any view
Parameter interface interface-type interface-number: Displays the debugging settings of the
specified interface, where interface-type interface-number represents the interface
type and number.
module-name: Module name.
Description Use the
display debugging command to display enabled debugging functions.
Related command: debugging.
Example # Display all enabled debugging functions.
<Sysname> display debugging
IP packet debugging is on
