1249
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] group test external
[Sysname-bgp-af-ipv6] peer test ebgp-max-hop
peer enable (IPv6 address family view)
Syntax peer { group-name | ipv4-address } enable
undo peer { group-name | ipv4-address } enable
View IPv6 address family view
Parameters group-name: Name of an IPv4 peer group, a string of 1 to 47 characters. The IPv4
peer group should be created beforehand.
ipv4-address: IPv4 address of a peer.
Description Use the
peer enable command to enable an IPv4 peer or peer group.
Use the
undo peer enable command to disable an IPv4 peer or peer group.
By default, no IPv4 peer or peer group is enabled.
If an IPv4 peer or peer group is disabled, the router will not exchange routing
information with it.
Examples # Enable peer 1.1.1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1.1.1.1 enable
peer fake-as (IPv6 address family view)
Syntax peer { ipv6-group-name | ipv6-address } fake-as as-number
undo peer { ipv6-group-name | ipv6-address } fake-as
View IPv6 address family view
Parameters ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
as-number: Local autonomous system number, in the range 1 to 65535.
