1008 CHAPTER 72: BGP CONFIGURATION COMMANDS
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] reflector cluster-id 80
refresh bgp
Syntax refresh bgp { all | ip-address | group group-name | external | internal } { export |
import }
View User view
Parameters all: Soft-resets all BGP connections.
ip-address: Soft-resets the BGP connection to a peer.
group-name: Soft-resets connections to a peer group, name of which is a sting of
1 to 47 characters.
external: EBGP connection.
internal: IBGP connection.
export: Outbound soft reset.
import: Inbound soft reset.
Description Use the refresh bgp command to perform soft reset on specified BGP
connections. Using this function can refresh the BGP routing table without tearing
down BGP connections and apply a newly configured routing policy.
To perform BGP soft reset, all routers in the network must support route-refresh. If
a router not supporting route-refresh exists in the network, you need to configure
the peer keep-all-routes command to save all routing updates before
performing soft reset.
Examples # Perform inbound BGP soft reset.
<Sysname> refresh bgp all import
reset bgp
Syntax reset bgp { all | as-number | ip-address [ flap-info ] | group group-name | external |
internal }
View User view
Parameters all: Resets all BGP connections.
as-number: Resets BGP connections to peers in the AS.
