1320 CHAPTER 85: IPV6 RIPNG CONFIGURATION COMMANDS
Parameters value: Additional metric to advertised routes, in the range of 1 to 16.
Description Use the
ripng metricout command to configure an additional metric for RIPng
routes advertised by an interface.
Use the
undo rip metricout command to restore the default.
The default additional routing metric is 1.
Related commands: ripng metricin.
Examples # Set the additional metric to 12 for routes advertised by Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ripng metricout 12
ripng poison-reverse
Syntax ripng poison-reverse
undo ripng poison-reverse
View Interface view
Parameters None
Description Use the
rip poison-reverse command to enable the poison reverse function.
Use the undo rip poison-reverse command to disable the poison reverse
function.
By default, the poison reverse function is disabled.
Examples # Enable the poison reverse function for RIPng update messages on Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ripng poison-reverse
ripng split-horizon
Syntax ripng split-horizon
undo ripng split-horizon
View Interface view
Parameters None
