2587
dscp media
Syntax dscp media dscp-value
undo dscp media
View POTS/VoIP entity view
Parameter dscp-value: DSCP value in the range of 0 to 63 or the keyword af11, af12, af13,
af21, af22, af23, af31, af32, af33, af41, af42, af43, cs1, cs2, cs3, cs4, cs5, cs6,
cs7, and ef.
Description Use the
dscp media command to set the DSCP value in the ToS field in the IP
packets that carry the RTP stream of the voice entity.
Use the
undo dscp media command to restore the default DSCP.
By default, the DSCP value is ef (101110).
Example # Set the DSCP value in the ToS field of the IP packets that carry the RTP stream of
VoIP voice entity to af41.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 2 voip
[Sysname-voice-dial-entity2] dscp media af41
dtmf amplitude
Syntax dtmf amplitude value
undo dtmf amplitude
View Voice view
Parameter value: DTMF amplitude in 0.1 dBm increments, in the range of -9.0 to -7.0.
Description Use the
dtmf amplitude command to configure the DTMF amplitude. Once
configured, the parameter applies to the whole device.
Use the
undodtmf amplitude command to restore the default value.
By default, the DTMF amplitude is -9.0 dBm.
Note that the configuration will apply to the whole device once you carry out this
command.
Example # Configure the DTMF amplitude to -8.0 dBm
