2596 CHAPTER 173: VOIP CONFIGURATION COMMANDS
Example # Enable fast connection for VoIP voice entity 10.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 voip
[Sysname-voice-dial-entity10] fast-connect
hookoff-mode
Syntax hookoff-mode { delay | immediate }
undo hookoff-mode
View Analog FXO voice subscriber line view
Parameter delay: Specifies the FXO voice subscriber line to operate in the delay off-hook
mode.
immediate: Specifies the FXO voice subscriber line to operate in the immediate
off-hook mode.
Description Use the
hookoff-mode command to configure the off-hook mode for the FXO
voice subscriber line.
Use the
undo hookoff-mode command to restore the default.
By default, the FXO voice subscriber line operates in the immediate off-hook
mode.
Example # Specify an FXO voice subscriber line to operate in the delay off-hook mode.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] subscriber-line 1/0
[Sysname-subscriber-line 1/0] hookoff-mode delay
hookoff-mode delay bind
Syntax hookoff-mode delay bind fxs_subscriber_line
undo hookoff-mode delay bind
View Analog FXO voice subscriber line view
Parameter fxs_subscriber_line: FXS voice subscriber line bound to the FXO voice subscriber
line.
Description Use the
hookoff-mode delay bind command to bind an FXS voice subscriber
line to the FXO voice subscriber line.
