706 CHAPTER 51: DHCP SERVER CONFIGURATION COMMANDS
bootfile-name
Syntax bootfile-name bootfile-name
undo bootfile-name
View DHCP address pool view
Parameter bootfile-name: Boot file name, a string of 1 to 63 characters.
Description Use the
bootfile-name command to specify a bootfile name in the DHCP
address pool for the client.
Use the
undo bootfile-name command to remove the specified bootfile name
from the DHCP address pool.
By default, no bootfile name is specified.
If you execute the bootfile-name command repeatedly, the latest configuration
will overwrite the previous one.
Example # Specify the bootfile name aaa in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] bootfile-name aaa
dhcp enable
Syntax dhcp enable
undo dhcp enable
View System view
Parameter None
Description Use the
dhcp enable command to enable DHCP.
Use the
undo dhcp enable command to disable DHCP.
By default, DHCP is disabled.
n
You need to enable DHCP before performing DHCP server and relay agent
configurations.
Example # Enable DHCP.
<Sysname> system-view
[Sysname] dhcp enable
