34
PPPOE CLIENT CONFIGURATION
COMMANDS
display pppoe-client session
Syntax display pppoe-client session { packet | summary } [ dial-bundle-number number ]
View Any view
Parameter packet: Displays the statistics of PPPoE session data packet.
summary: Displays the summary of PPPoE session.
dial-bundle-number number: Displays the statistics of the specified PPPoE
session, in the range 1 to 255. If PPPoE session is not specified, the system will
display the statistics of all PPPoE sessions.
Description Use the
display pppoe-client session command to display the state and
statistics of PPPoE session.
Example # Display the summary of PPPoE session.
<Sysname> display pppoe-client session summary
There are 2 sessions in total:
ID Bundle Dialer Intf Client-MAC Server-MAC State
1 1 1 Eth1/0 00e0fc0254f3 00049a23b050 PPPUP
2 2 2 Eth1/0 00e0fc0254f3 00049a23b050 PPPUP
# Display the statistics of PPPoE session packet
<Sysname> display pppoe-client session packet
PPPoE Client Session:
ID InP InO InD OutP OutO OutD
=================================================================
Table 86 Description on the fields of display pppoe-client session summary
Field Description
ID Session ID, PPPoE session ID
Server-MAC MAC address of PPPoE server
Client-MAC MAC address of PPPoE client
Dialer Corresponding dialer interface of PPPoE session
Bundle Dialer bundle containing PPPoE session
Intf Ethernet interface containing PPPoE session
State State of PPPoE session
