607
revision-level
Syntax revision-level level
undo revision-level
View MST region view
Parameters level: MSTP revision level, in the range of 0 to 65535. The system default is 0.
Description Use the
region-level command to configure the MSTP revision level of your
device.
Use the
undo region-level command to restore the MSTP revision level to the
default setting.
The MSTP revision level, the MST region name and the VLAN-to-instance mapping
table of a device jointly determine the MST region the device belongs to.
Related commands: instance, region-name, check region-configuration, vlan-mapping modulo,
and active region-configuration.
Examples # Set the MSTP revision level of the MST region to 5.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] revision-level 5
stp
Syntax stp { enable | disable }
undo stp
View System view, Ethernet interface view, port group view
Parameters enable: Enables the MSTP feature.
disable: Disables the MSTP feature.
Description Use the
stp command to enable or disable the MSTP feature globally or for a port
or a group of ports.
Use the
undo stp command to restore the default MSTP status globally or for a
port or a group of ports.
By default, MSTP is enabled for all ports, and disabled globally.
Note that:
