1608 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS
Upon expiration of the blockade timeout time, the blockade state on the node is
removed.
Before you can configure this command, enable RSVP-TE.
Related command: mpls rsvp-te timer refresh.
Example # Set the blockade multiplier to five.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls rsvp-te blockade-multiplier 5
mpls rsvp-te graceful-restart
Syntax mpls rsvp-te graceful-restart
undo mpls rsvp-te graceful-restart
View MPLS view
Parameters None
Description Use the
mpls rsvp-te graceful-restart command to enable the GR capability
for MPLS RSVP-TE.
Use the
undo mpls rsvp-te graceful-restart command to disable MPLS
RSVP-TE GR.
By default, GR capability is disabled for MPLS RSVP-TE.
Note that you need to enable RSVP-TE hello extension before enabling RSVP-TE
GR.
Examples # Enable MPLS RSVP-TE GR.
<Sysname> system-view
[Sysname] mpls lsr-id 1.1.1.1
[Sysname] mpls
[Sysname-mpls] mpls te
[Sysname-mpls] mpls rsvp-te
[Sysname-mpls] mpls rsvp-te hello
[Sysname-mpls] mpls rsvp-te graceful-restart
mpls rsvp-te hello
Syntax mpls rsvp-te hello
undo mpls rsvp-te hello
