1840 CHAPTER 118: PRIORITY MAPPING TABLE CONFIGURATION COMMANDS
qos map-table dot1p-Ip
Syntax qos map-table dot1p-lp
View System view
Parameters dot1p-lp: Mapping table of 802.1p priority to local priority.
Description Use the
qos map-table command to enter the specified priority mapping table
view.
Related commands: display qos map-table.
Examples # Enter the mapping table view from 802.1p priority to local priority.
<Sysname> system-view
[Sysname]qos map-table dot1p-lp
[Sysname-maptbl-dot1p-lp]
import
Syntax import import-value-list export export-value
undo import { import-value-list | all }
View Priority mapping table view
Parameters import-value-list: Maps input parameter list.
export-value: Maps export parameters.
all: Deletes all parameters in this mapping table.
Description Use the
import command to configure the parameters in the specified priority
mapping table to define a mapping rule or a group of mapping rules.
Use the
undo import command to delete the mapping entries corresponding to
specified mapping index. The deleted entries are restored to default value.
The default value is shown in the following table:
Table 488 Parameters in the default mapping table
802.1p priority Local priority
0 2
1 0
2 1
3 3
