1234 CHAPTER 82: IPV6 BGP CONFIGURATION COMMANDS
BGP Local router ID is 1.1.1.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin:i-IGP, e - EGP, ? - incomplete
*d Network : 111:: PrefixLen : 64
From : 122::1 Reuse : 00:29:34
Path/Ogn: 200?
Refer to Table 291 for description on the fields above.
display bgp ipv6 routing-table dampening parameter
Syntax display bgp ipv6 routing-table dampening parameter
View Any view
Parameters None
Description Use the
display bgp ipv6 routing-table dampening parameter command
to display IPv6 BGP routing dampening parameters.
Related commands: dampening (IPv6 address family view).
Examples # Display IPv6 BGP routing dampening parameters.
<Sysname> display bgp ipv6 routing-table dampening parameter
Maximum Suppress Time(in second) : 3069
Ceiling Value : 16000
Reuse Value : 750
HalfLife Time(in second) : 900
Suppress-Limit : 2000
display bgp ipv6 routing-table different-origin-as
Syntax display bgp ipv6 routing-table different-origin-as
Table 292 Description on the fields of the display bgp ipv6 routing-table dampened
command
Field Description
From Source IP address of a route
Reuse Time for reuse
Table 293 Description on the above fields
Field Description
Maximum Suppress Time Maximum Suppress Time
Ceiling Value Upper limit of penalty value
Reuse Value Reuse Value
HalfLife Time Half life Time
Suppress-Limit Suppress value
