A SERVICE OF

logo

168
ACFP CONFIGURATION COMMANDS
acfp enable
Syntax acfp enable
undo acfp enable
View System view
Parameters None
Description Use the
acfp enable command to enable ACFP.
Use the
undo acfp enable command to disable ACFP.
ACFP is disabled by default.
Example # Enable ACFP.
<Sysname> system-view
[Sysname] acfp enable
display acfp client-info
Syntax display acfp client-info [ client-id ]
View Any view
Parameters client-id: Displays information of the specified ACFP client, where client-id
represents the ACFP client ID, in the range of 1 to 2147483647.
Description Use the
display acfp client-info command to display the information about the
specified ACFP client(s).
Note that:
If ACFP client ID is specified, the information about the specified ACFP client is
displayed.
If no ACFP client ID is specified, the information about all the ACFP clients is
displayed.