1748 CHAPTER 102: DVPN TUNNEL CONFIGURATION COMMANDS
Related command: interface tunnel on page 884.
Example # Configure the DVPN tunnel mode.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] tunnel-protocol dvpn udp
vam client
Syntax vam client client-name
undo vam client
View Tunnel interface view
Parameter client-name: Name of the VAM client, a case-insensitive string of 1 to 31
characters.
Description Use the
vam client command to specify the VAM client to be referenced on a
DVPN tunnel interface.
Use the
undo vam client command to remove the VAM client.
By default, a DVPN tunnel interface references no VAM client.
Note that a DVPN tunnel interface can reference only one VAM client.
Related command: interface tunnel on page 884 and tunnel-protocol on page 887.
Example # Configure DVPN tunnel interface Tunnel0 to reference VAM client abc.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] vam client abc
