1485
View Interface view
Parameter None
Description Use the
pim ipv6 bsr-boundary command to configure a BSR admin-scope
region boundary on the current interface.
Use the
undo pim ipv6 bsr-boundary command to remove the configured BSR
admin-scope region boundary.
By default, no BSR admin-scope region boundary is configured.
Related command: c-bsr (IPv6 PIM view), multicast ipv6 boundary on page 1436.
Example # Configure Ethernet 1/0 to be the boundary of the BSR admin-scope region.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 bsr-boundary
pim ipv6 dm
Syntax pim ipv6 dm
undo pim ipv6 dm
View Interface view
Parameter None
Description Use the
pim ipv6 dm command to enable IPv6 PIM-DM.
Use the
undo pim ipv6 dm command to disable IPv6 PIM-DM.
By default, IPv6 PIM-DM is disabled.
Note that IPv6 PIM-DM cannot be used for IPv6 multicast groups in the IPv6 SSM
group range.
Related commands: pim ipv6 sm, ssm-policy (IPv6 PIM view).
Example # Enable IPv6 PIM-DM on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 dm
