710 CHAPTER 51: DHCP SERVER CONFIGURATION COMMANDS
View System view
Parameter milliseconds: Response timeout value for ping packets in milliseconds, in the range
of 0 to 10,000. If the ping timeout time is set to 0, the DHCP server will not
perform any ping collision detection.
Description Use the dhcp server ping timeout command to configure response timeout
time of the ping packet on the DHCP server.
Use the
undo dhcp server ping timeout command to restore the default.
The time defaults to 500.
Example # Specify the response timeout time as 1000ms.
<Sysname> system-view
[Sysname] dhcp server ping timeout 1000
dhcp server relay information enable
Syntax dhcp server relay information enable
undo dhcp server relay information enable
View System view.
Parameter None
Description Use the
dhcp server relay information enable command to enable the DHCP
server to handle option 82.
Use the
undo dhcp server relay information enable command to disable
the DHCP server from handling option 82.
By default, the DHCP server handles Option 82.
Example # Configure the DHCP server to ignore Option 82.
<Sysname> system-view
[Sysname] undo dhcp server relay information enable
dhcp update arp
Syntax dhcp update arp
undo dhcp update arp
View Interface view
