2486 CHAPTER 166: POE CONFIGURATION COMMANDS
display poe device
Syntax display poe device
View Any view
Parameter None
Description Use the
display poe device command to display the mapping between ID,
module, and slot of the power sourcing equipment (PSE).
Example # Display the mapping between ID, module, and slot of each PSE. (The
information displayed varies with devices.)
<Sysname> display poe device
PSE ID SlotNo PortNum MaxPower(W) State Model
5 5 24 200 on LSBMGV48TP
6 6 16 200 on LSB1GV48
display poe interface
Syntax display poe interface [ interface-type interface-number ]
View Any view
Parameter interface-type interface-number: Interface type and interface number.
Description Use the
display poe interface command to display the power information of
the specified interface.
If no interface is specified, the power information of all PoE interfaces is displayed.
Example # Display the state of Ethernet 1/0.
<Sysname> display poe interface ethernet 1/0
Port Power Priority : critical
Table 639 Description on fields of the display poe device command
Field Description
PSE ID ID of the PSE
SlotNo Slot number of the PSE
PortNum Number of PoE interfaces on the PSE
MaxPower(W) Maximum power of the PSE (W)
State PSE state:
on: The PSE is supplying power.
off: The PSE stops supplying power.
faulty: The PSE is faulty
Model PSE model
