2714 CHAPTER 179: VOFR CONFIGURATION COMMANDS
entity vofr
Syntax entity entity-number vofr
undo entity entity-number vofr
View Voice dial program view
Parameter entity-number: Entity number, in the range of 1 to 2147483647.
vofr: VoFR entity
Description Use the
entity command to enter VoFR entity view.
Use the
undo entity command to remove the existing voice entity.
When you configure VoIP entities, POTS entities, and VoFR entities, they should be
identified with different entity-number.
Example # Create a VoFR entity and number it 10.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 vofr
outband vofr
Syntax outband vofr
undo outband
View VoFR entity view
Parameter None
Description Use the
outband vofr command to configure the out-of-band DTMF
transmission mode.
Use the
undo outband command to restore the default.
Table 700 Description on fields of the display fr vofr-info command
Field Description
interface(dlci) Frame relay interface name (DLCI number)
vofr-mode VoFR call control protocol, for example, VoFR nonstandard-compatible
and VoFR-Huawei-compatible.
cid Voice channel number
cid-type Type of a voice channel
