857
Example # Configure a static neighbor entry for Layer 3 interface Ethernet1/0.
<Sysname> system-view
[Sysname] ipv6 neighbor 2000::1 fe-e0-89 interface ethernet1/0
ipv6 neighbors max-learning-num
Syntax ipv6 neighbors max-learning-num number
undo ipv6 neighbors max-learning-num
View Interface view
Parameter number: Maximum number of neighbors that can be dynamically learned by an
interface, in the range of 1 to 2,048. The default value is 1,024.
Description Use the
ipv6 neighbors max-learning-num command to configure the
maximum number of neighbors that can be dynamically learned on a specified
interface.
Use the
undo ipv6 neighbors max-learning-num command to restore the
default.
Example # Set the maximum number of neighbors that can be dynamically learned on
Ethernet1/0 to 10.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] ipv6 neighbors max-learning-num 10
ipv6 pathmtu
Syntax ipv6 pathmtu ipv6-address [ value ]
undo ipv6 pathmtu ipv6-address
View System view
Parameter ipv6-address: Specified IPv6 address.
value: PMTU of a specified IPv6 address in bytes, in the range of 1,280 to 10,000.
Description Use the
ipv6 pathmtu command to configure a static PMTU for a specified IPv6
address.
Use the
undo ipv6 pathmtu command to remove the PMTU configuration for a
specified IPv6 address.
By default, no static PMTU is configured.
