1796 CHAPTER 109: DEFINING TRAFFIC BEHAVIOR COMMANDS
remark dot1p
Syntax remark dot1p 8021p
undo remark dot1p
View Traffic behavior view
Parameters 8021p: Remarked 802.1p priority value, in the range 0 to 7.
Description Use the
remark dot1p command to configure the 802.1p priority value of the
remarked packet.
Use the
undo remark dot1p command to remove the 802.1p priority value
from the remarked packet.
By default, no 802.1p priority is marked.
Related commands: qos policy, traffic behavior, classifier behavior.
Examples # Set the 802.1p priority value of the remarked packet to 2.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark dot1p 2
remark dscp
Syntax remark dscp dscp-value
undo remark dscp
View Traffic behavior view
Parameters dscp-value: DSCP value, in the range 0 to 63, which can be any of these keywords
listed in Table 479:
Table 479 DSCP keywords and values
Keyword DSCP value (binary) DSCP value (decimal)
default 000000 0
af11 001010 10
af12 001100 12
af13 001110 14
af21 010010 18
af22 010100 20
af23 010110 22
af31 011010 26
