1891
fr traffic-policing
Syntax fr traffic-policing
undo fr traffic-policing
View Frame relay interface view, MFR interface view
Parameters None
Description Use the
fr traffic-policing command to enable FRTP function.
Use the undo fr traffic-policing command to disable FRTP function.
FRTP function is applied to the inbound interface of FR packets on a router.
Furthermore, it is only used at the DCE end of a FR network.
When configuring traffic policing for an inbound interface, you must first set the
DCE as a FR switching by using the fr switching command.
Related commands: fr class.
Examples # Enable the traffic policing function on the interface Serial 1/0.
<Sysname> system-view
[Sysname] interface Serial 1/0
[Sysname-Serial1/0] fr traffic-policing
fr traffic-shaping
Syntax fr traffic-shaping
undo fr traffic-shaping
View Frame relay interface view, MFR interface view
Parameters None
Description Use the
fr traffic-shaping command to enable FRTS function.
Use the undo fr traffic-shaping command to disable FRTS function.
By default, FRTS function is disabled.
The FRTS function is applied to the outbound interface of a router, generally used
at the DTE end of a FR network.
Related commands: fr class, fr-class, fr dlci.
