A SERVICE OF

logo

774 CHAPTER 58: IP ACCOUNTING CONFIGURATION COMMANDS
display ip count rule
Syntax display ip count rule
View Any view
Parameter None
Description Use the
display ip count rule command to display IP accounting rules.
Example # Display IP accounting rules.
<Sysname> display ip count rule
IP Count rule list:
IP address address mask
1.1.1.0 255.255.255.0
2.0.0.0 255.0.0.0
------------------------------------
Total: 2 rules
ip count enable
Syntax ip count enable
undo ip count enable
View System view
Parameter None
Description Use the
ip count enable command to enable IP accounting.
Use the
undo ip count enable command to disable IP accounting.
By default, IP accounting is disabled.
Protocol Protocol carried in a packet
Pkts Number of packets
Bytes Number of bytes of packets
Table 152 Description on the fields of the display ip count command
Field Description
Table 153 Description on fields of the display ip count rule command
Field Description
IP address IP address
address mask Subnet mask