112 CHAPTER 1: PUBLIC ATM AND DSL INTERFACE COMMANDS
interface atm
Syntax interface atm interface-number
View System view
Parameter interface-number: ATM or DSL interface number or DSL interface view.
Description Use the
interface atm command to enter ATM interface view.
Example # Enter ATM 2/0 interface view.
<Sysname> system-view
[Sysname] interface atm 2/0
[Sysname-Atm2/0]
reset atm interface
Syntax reset atm interface [ atm interface-number ]
View User view
Parameter atm interface-number: Specifies an ATM interface.
Description Use the
reset atm interface command to clear the statistics on the PVCs
created on an ATM interface or all the ATM interfaces.
Note that:
■ If you execute this command with an ATM interface specified, this command
displays the statistics on the PVCs created on the ATM interface.
■ If you execute this command with no ATM interface specified, the statistics on
the PVCs created on all the ATM interfaces are cleared.
To clear statistics about ATM interfaces, use the reset counters interface
command, which is described in Ethernet Interface Commands in the Access
Volume.
Example # Clear the statistics on all the PVCs created on ATM 2/0 interface.
<Sysname> reset atm interface atm 2/0
