1171
<Sysname> system-view
[Sysname] rip 1
[Sysname-rip-1] import-route static cost 4
# Set the default cost for redistributed routes to 3.
[Sysname-rip-1] default cost 3
# Redistribute OSPF routes with the cost being the default cost.
[Sysname-rip-1] import-route ospf
maximum load-balancing (RIP view)
Syntax maximum load-balancing number
undo maximum load-balancing
View RIP view
Parameters number: Maximum number of load balanced routes, in the range 1 to 8.
Description Use the
maximum load-balancing command to specify the maximum number
of load balanced routes.
Use the
undo maximum load-balancing command to restore the default.
Examples # Specify the maximum number of load balanced routes as 2.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1] maximum load-balancing 2
network
Syntax network network-address
undo network network-address
View RIP view
Parameters network-address: IP address of a network segment, which can be the IP network
address of any interface.
Description Use the
network command to enable RIP on the interface attached to the
specified network.
Use the
undo network command to disable RIP on the interface attached to the
specified network.
