1761
Use the undo l2tp enable command to disable the function.
By default, an LNS includes ACCM in control messages.
Example # Disable the ACCM function.
<Sysname> system-view
[Sysname] undo l2tp sendaccm enable
l2tpmoreexam enable
Syntax l2tpmoreexam enable
undo l2tpmoreexam enable
View System view
Parameter None
Description Use the
l2tpmoreexam enable command to enable the L2TP multi-instance
function.
Use the
undo l2tpmoreexam enable command to disable the L2TP
multi-instance function.
By default, the L2TP multi-instance function is disabled.
Note that this command is available for only LNSs.
Related command: l2tp enable.
Example # Enable the L2TP multi-instance function for the router.
<Sysname> system-view
[Sysname] l2tpmoreexam enable
l2tp-group
Syntax l2tp-group group-number
undo l2tp-group group-number
View System view
Parameter group-number: Number for identifying the L2TP group, in the range of 1 to 1000.
Description Use the
l2tp-group command to create an L2TP group and enter its view.
Use the
undo l2tp-group command to remove an L2TP group.
