1950 CHAPTER 128: RADIUS CONFIGURATION COMMANDS
accounting-on enable interval
Syntax accounting-on enable interval seconds
undo accounting-on interval
View RADIUS scheme view
Parameter seconds: Time interval to retransmit accounting-on packet in seconds, ranging
from 1 to 15.
Description Use the
accounting-on enable interval command to configure the
retransmission interval of accounting-on packets.
Use the
undo accounting-on enable interval command to restore the
default.
By default, the retransmission interval of accounting-on packets is 3 seconds.
Note that:
■ This command is applicable to centralized devices only.
■ Execution of this command does not affect the results of other accounting-on
related commands such as accounting-on enable. That is, execution of the
undo accounting-on enable interval command will not disable the
accounting-on function.
■ The retransmission interval configured with this command takes effect
immediately.
Related command: radius scheme, accounting-on enable
Example # In RADIUS scheme rd, set the retransmission interval of accounting-on packet to
5 seconds.
<Sysname> system-view
[Sysname] radius scheme rd
[Sysname-radius-rd] accounting-on enable interval 5
accounting-on enable send
Syntax accounting-on enable send send-times
undo accounting-on send
View RADIUS scheme view
Parameter send-times: Maximum number of accounting-on packet retransmission attempts,
ranging from 1 to 255.
