1541
undo graceful-restart timer reconnect
View MPLS LDP view
Parameter timer: Fault Tolerance (FT) reconnect time, in the range 60 to 300 seconds.
Description Use the
graceful-restart timer reconnect command to set the FT reconnect
time.
Use the
undo graceful-restart timer reconnect command to restore the
default.
By default, the FT reconnect time is 300 seconds.
Note that:
■ The FT reconnect time refers to the maximum time that the stale state flag will
be preserved by the LSR after the TCP connection fails.
■ Modifying the FT reconnect time may cause all original sessions to be
reestablished. LSPs based on the sessions will be removed and need to be
reestablished.
Example # Set the FT reconnect time to 100 seconds.
<Sysname> system-view
[Sysname] mpls ldp
[Sysname-mpls-ldp] graceful-restart timer reconnect 100
graceful-restart timer recovery
Syntax graceful-restart timer recovery timer
undo graceful-restart timer recovery
View MPLS LDP view
Parameter timer: LDP recovery time, in the range 3 to 300 seconds.
Description Use the
graceful-restart timer recovery command to set the LDP recovery
time.
Use the
undo graceful-restart timer recovery command to restore the
default.
By default, the LDP recovery time is 300 seconds.
Note that:
■ The LDP recovery time refers to the maximum time that the stale state label will
be kept by the LSR after a TCP reconnection.
