1854 CHAPTER 122: WRED TABLE CONFIGURATION COMMANDS
qos wred queue table
Syntax qos wred queue table table-name
undo qos wred table table-name
View System view
Parameters queue: Queue-based table, which randomly drops packets according to the
queue the packet belongs to when congestion occurs.
table table-name: Specified the table name, a string of characters in the range 1
to 32.
Description Use the
qos wred queue table command to create WRED table and enter the
WRED table view.
Use the
undo qos wred table command to delete the global WRED table.
By default, no global WRED table exists.
It is not allowed to delete the table being used.
The queue-based WRED table can be applied only on Layer 2 port, on which the
queue-based WRED table can be applied only.
Related commands: qos wfq, qos wred enable, display qos wred interface.
Examples # Create queue-based WRED table exp-table1.
<Sysname> system-view
[Sysname] qos wred queue table exp-table1
[Sysname-wred-table-queue-table1]
qos wred apply
Syntax qos wred apply table-name
undo qos wred apply
View L2 interface view/port group view
Parameters table-name: Specifies the WRED table name.
Discard probability Denominator for calculating drop probability
Table 492 Description on the fields of the display qos wred table command
Field Description
