2707
By default, IP address is used.
Example # Set the domain name of the SIP device to hello.com.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] sip-domain hello.com
source-ip
Syntax source-ip ip-address
undo source-ip
View SIP client view
Parameter ip-address: IPv4 address.
Description Use the
source-ip command to configure the source IP address bound to the
packets sent by the UA.
Use the
undo source-ip command to remove the configuration.
By default, no source IP address is configured to be bound to the packets sent by
the UA.
Note that the source IP address must be already assigned to a gateway interface.
You can use this command only when the SIP registration function is disabled.
Example # Specify 1.1.1.1 as the source IP address bound to the packets sent by the UA.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] source-ip 1.1.1.1
user
Syntax user username password { cipher | simple } password [ cnonce cnonce | realm
realm ] *
undo user
View SIP client view/POTS entity view
Parameter username: Username used for registration authentication, a string of 1 to 31
case-sensitive characters. The characters """ and "" are invalid.
