2165
Example # Create IKE proposal 10 and enter IKE proposal view.
<Sysname> system-view
[Sysname] ike proposal 10
[Sysname-ike-proposal-10]
ike sa keepalive-timer interval
Syntax ike sa keepalive-timer interval seconds
undo ike sa keepalive-timer interval
View System view
Parameter seconds: Transmission interval of ISAKMP SA keepalives in seconds, in the range
20 to 28,800.
Description Use the
ike sa keepalive-timer interval command to set the ISAKMP SA
keepalive interval.
Use the
undo ike sa keepalive-timer interval command to disable the
ISAKMP SA keepalive transmission function.
By default, no keepalive packet is sent.
Note that the keepalive interval configured at the local end must be shorter than
the keepalive timeout configured at the remote end.
Related command: ike sa keepalive-timer timeout.
Example # Set the keepalive interval to 200 seconds.
<Sysname> system-view
[Sysname] ike sa keepalive-timer interval 200
ike sa keepalive-timer timeout
Syntax ike sa keepalive-timer timeout seconds
undo ike sa keepalive-timer timeout
View System view
Parameter seconds: ISAKMP SA keepalive timeout in seconds, in the range 20 to 28,800.
Description Use the
ike sa keepalive-timer timeout command to asset the ISAKMP SA
keepalive timeout.
Use the
undo ike sa keepalive-timer timeout command to disable the
function.
