25
HDLC CONFIGURATION COMMANDS
link-protocol hdlc
Syntax link-protocol hdlc
View Interface view
Parameter None
Description Use the
link-protocol hdlc command to configure HDLC encapsulation on the
interface.
As a data link layer protocol, HDLC can carry network layer protocols, such as IP
and IPX.
By default, PPP encapsulation is configured on an interface.
Related command: timer hold
Example # Configure HDLC encapsulation on interface Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] link-protocol hdlc
timer hold
Syntax timer hold seconds
undo timer hold
View Interface view
Parameter seconds: Link status polling interval (in seconds), in the range 0 to 32767.
Description Use the
timer hold command to set the polling interval.
Use the
undo timer hold command to restore the default.
By default, the link status polling interval is 10 seconds on the interface.
