2695
Use the undo gk-security call enable command to disable security calling on
the voice gateway.
By default, security calling is enabled.
c
CAUTION: Disable security calling for the voice gateway if the called gatekeeper
cannot handle call tokens.
Example # Disable security calling for the voice gateway.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client
[Sysname-voice-gk] undo gk-security call enable
gk-security register-pwd
Syntax gk-security register-pwd { cipher | simple } password
undo gk-security register-pwd
View Gatekeeper client view
Parameter cipher: Displays passwords in ciphertext.
simple: Displays passwords in plain text.
password: A string of 1 to 16 characters excluding spaces.
Description Use the
gk security register-pwd command to configure a password for
registration with the gatekeeper.
Use the
undo gk-security register-pwd command to remove the registration
password.
By default, no registration password is configured on the voice gateway.
Note that messages exchanged during the entire registration process will carry the
registration password, if it is configured on the voice gateway.
Example # Configure a registration password aaa and set its display mode to ciphertext.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] gk-client
[Sysname-voice-gk] gk-security register-pwd cipher aaa
gw-address
Syntax gw-address ip-address
