2334 CHAPTER 154: SNMP CONFIGURATION COMMANDS
Description Use the display snmp-agent sys-info command to display the current SNMP
system information.
If no keyword is specified, all SNMP agent system information will be displayed.
Example # Display the current SNMP agent system information.
<Sysname> display snmp-agent sys-info
The contact person for this managed node:
Hangzhou H3C Technology Co., Ltd.
The physical location of this node:
Hangzhou China
SNMP version running in the system:
SNMPv3
display snmp-agent trap-list
Syntax display snmp-agent trap-list
View Any view
Parameter None
Description Use the
display snmp-agent trap-list command to display the modules that
can send the Trap messages and whether their Trap sending is enabled or not. If a
module comprises of multiple sub-modules, then as long as one sub-module has
the sending of Trap messages enabled, the whole module will be displayed as
being enabled with the Trap sending.
Related command: snmp-agent trap enable.
Example # Display the modules that can send the Trap messages and whether their Trap
sending is enabled or not.
<Sysname> display snmp-agent trap-list
bgp trap enable
configuration trap enable
flash trap enable
fr trap enable
isdn trap enable
mpls trap enable
ospf trap enable
standard trap enable
system trap enable
voice trap enable
vrrp trap enable
Enable traps: 11; Disable traps: 0
