1496 CHAPTER 93: IPV6 PIM CONFIGURATION COMMANDS
source-lifetime (IPv6 PIM view)
Syntax source-lifetime interval
undo source-lifetime
View IPv6 PIM view
Parameter interval: IPv6 multicast source lifetime in seconds, with an effective range of 1 to
65,535.
Description Use the
source-lifetime command to configure the IPv6 multicast source
lifetime.
Use the
undo source-lifetime command to restore the default setting.
By default, the lifetime of an IPv6 multicast source is 210 seconds.
Related command: state-refresh-interval (IPv6 PIM view).
Example # Set the IPv6 multicast source lifetime to 200 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] source-lifetime 200
source-policy (IPv6 PIM view)
Syntax source-policy acl6-number
undo source-policy
View IPv6 PIM view
Parameter acl6-number: Basic or advanced IPv6 ACL number, in the range of 2000 to 3999.
Description Use the
source-policy command to configure an IPv6 multicast data filter.
Use the undo source-policy command to remove the configured IPv6 multicast
data filter.
By default, no IPv6 multicast data filter is configured.
Note that:
■ If you specify a basic ACL, the device filters all the received IPv6 multicast
packets based on the source address, and discards packets that fail the source
address match.
