648 CHAPTER 41: VOICE VLAN CONFIGURATION COMMANDS
Related command: display voice vlan state.
Example # Configure the aging time of the voice VLAN as 100 minutes.
<Sysname> system-view
[Sysname] voice vlan aging 100
voice vlan enable
Syntax voice vlan enable
undo voice vlan enable
View Ethernet interface view
Parameter None
Description Use the
voice vlan enable command to enable the voice VLAN feature on an
Ethernet port.
Use the
undo voice vlan enable command to disable the voice VLAN feature
on an Ethernet port.
No voice VLAN is enabled on a port by default.
■ Under automatic mode, only The Trunk or Hybrid port can be configured with
the voice VLAN feature. The Access port cannot be configured with this
feature.
■ Before enabling the voice VLAN feature on a port, ensure that its is enabled
globally first
■ Only after the voice VLAN feature is enabled under both system view and
Ethernet interface view will it functions properly.
Example # Enable the voice VLAN attribute on the port Ethernet 1/0.
<Sysname> system-view
[Sysname] voice vlan 2 enable
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] voice vlan enable
voice vlan mac-address
Syntax voice vlan mac-address mac-addr mask oui-mask [ description text ]
undo voice vlan mac-address oui
View System view
Parameter mac-addr: MAC address, in the format of H-H-H, such as 1234-1234-1234.
