137
COMMON CONFIGURATION
COMMANDS
display time-range
Syntax display time-range { time-name | all }
View Any view
Parameter time-name: Time range name comprising 1 to 32 characters. It is case insensitive
and must start with an English letter. To avoid confusion, this name cannot be all.
all: All existing time ranges.
Description Use the
display time-range command to display the configuration and state of
a specified or all time ranges.
A time range is active if the system time falls into its range, and if otherwise,
inactive.
Example # Display the configuration and state of time range trname.
[Sysname] display time-range trname
Current time is 10:45:15 4/14/2005 Thursday
Time-range : trname ( Inactive )
from 08:00 12/1/2005 to 23:59 12/31/2100
time-range
Syntax time-range time-name { start-time to end-time days [ from time1 date1 ] [ to time2
date2 ] | from time1 date1 [ to time2 date2 ] | to time2 date2 }
undo time-range time-name [ start-time to end-time days [ from time1 date1 ] [ to
time2 date2 ] | from time1 date1 [ to time2 date2 ] | to time2 date2 ]
View System view
Table 544 Description on the fields of the display time-range command
Field Description
Current time Current system time
Time-range The configuration and state of time range, such as time range name, its
activated state, and start time and ending time.
