20
DCC CONFIGURATION COMMANDS
n
Set all synchronous/asynchronous serial interfaces involved in DCC configuration
to work in asynchronous mode with the physical-mode async command.
dialer bundle
Syntax dialer bundle number
undo dialer bundle
View Dialer interface view
Parameter number: Dialer bundle number, in the range 1 to 255.
Description Use the
dialer bundle command to associate a dialer bundle with a dialer
interface in RS-DCC.
Use the
undo dialer bundle command to remove the association.
By default, dialer interfaces are not associated with any dialer bundle in RS-DCC.
This command applies only to dialer interfaces. In addition, a dialer interface can
be associated with only one dialer bundle.
Related command: dialer bundle-member.
Example # Associate dialer bundle 3 with interface Dialer1.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] dialer bundle 3
dialer bundle-member
Syntax dialer bundle-member number [ priority priority ]
undo dialer bundle-member number
View Dial (physical) interface view
Parameter number: Dialer bundle number, in the range 1 to 255.
