1182 CHAPTER 77: RIP CONFIGURATION COMMANDS
<Sysname> system-view
[Sysname] rip 100
[Sysname-rip-100] silent-interface all
[Sysname-rip-100] undo silent-interface ethernet1/0
[Sysname-rip-100] network 131.108.0.0
summary
Syntax summary
undo summary
View RIP view
Parameters None
Description Use the
summary command to enable automatic RIP-2 summarization. Natural
masks are used to advertise summary routes so as to reduce the size of routing
tables.
Use the
undo summary command to disable automatic RIP-2 summarization so
that all subnet routes can be broadcasted.
By default, automatic RIP-2 summarization is enabled.
Enabling automatic RIP-2 summarization can reduce the size of the routing table
to enhance the scalability and efficiency of large networks.
Related commands: rip version.
Examples # Enable RIP-2 automatic summarization.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1] summary
timers
Syntax timers { garbage-collect garbage-collect-value | suppress suppress-value | timeout
timeout-value | update update-value }*
undo timers { garbage-collect | suppress | timeout | update } *
View RIP view
Parameters garbage-collect-value: Garbage-collect timer time in seconds, in the range of 1 to
3600.
suppress-value: Suppress timer time in seconds, in the range of 0 to 3600.
